Wybron Coloram II User Manual download pdf (Page 11)

6. Set the power supply/color changer channels

Each color changer is assigned a DMX channel to which it will respond from the lighting

console. Valid DMX addresses are 001 - 512.

First, set the first channel for the block of DMX channels chosen for the power supply --

do this on the power supply. Then, set the color changer (the rotary switch and third DIP

switch) for the first, second, etc channel of the block of power supply channels.

For example, if you want a color changer to respond to DMX channel 105, first set the

power supply channel block to start on channel 105 and then set the color changer to

channel 1-- the first channel in the block of power supply channels.

Set the power supply starting DMX channel by using the SETUP menu. If talkback is

enabled on the power supply, the starting power supply channel is limited to 1, 4, 7, 10,

13, etc.

The rotary switch window is the channel indicator. The color changer switch settings

and the 24 channels they represent are as follows:

Rotary

Switch

DIP Switch

Color Changer

channels

Off

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Wybron Coloram II User Manual Page 11