Wybron Nexera LX Specifications download pdf (Page 13)

Nexera and The RAM System

The Nexera gets power from the RAM Power Supply, making it a RAM System

compatible device. The system consists of one or more Nexera Luminaires and/or one or

more other RAM compatible products and a RAM Power Supply.

The DMX512 control signal from the lighting board is connected to the Power Supply and

can continue on to more RAM Power Supplies or other DMX controlled devices. The

RAM Power Supply sends both power and control signal to the Nexera and any other

devices on a single cable.

A RAM Power Supply can power the following number of Nexeras:

PS-600 (600 watts): up to sixteen (16) tungsten or twelve (12) CDM fixtures

PS-300 (300 watts): up to eight (8) tungsten or six (6) CDM fixtures

PS-150 (150 watts): up to four (4) tungsten or three (3) CDM fixtures

See Head-Feet Restrictions for maximum number of units and distances for a single link.

Note: Nexera is compatible with all RAM Power Supplies equipped with software

version 3.11 or higher, and set to CR2 mode. The most recent power supply

software version can be downloaded from www.wybron.com.

The RAM system is not compatible with the

Forerunner system. DO NOT connect Nexera to

Forerunner Power Supplies, or Forerunner Color Changers to RAM

Power Supplies. The Forerunner and the RAM System warranties

will not cover damage from such action.

RAM

Power

Supply

Nexera

DMX control

console

DMX512

AC Power

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

No comments

Wybron Nexera LX Specifications Page 13