Eclipse IT Shutter User Manual
10 [Alerts Menu] > [DMX Status] DMX Address: 512 Settings > Sensor Info > History Local Control > Reset Defaults > FIN ALER
11 Voltage > Fan RPM > Sensor Info Operating Hours > Host Light Lamp > Fin Cycles = 2140 History Fin Position Move Mode: Snap
12 MENU DETAILS 1. Use the arrow buttons to scroll through selections on the display. 2. Press SELECT to activate that selection or progress to th
13 • “VOLTAGE DROPPED BELOW 13V UNIT SHUTDOWN” Unit has automatically shut down because operating voltage has dropped below 13 volts for more tha
14 Settings DMX ADDRESSES Dowser Addr (Dowser Address) A. Use the arrow buttons to select the desired DMX address. B. Press SELECT to activate t
15 History OPERATING HOURS Cleaning Info A. Lifetime operating hours are shown at the bottom of the first display. This is the total number of ho
16 Reset Hours i. Press SELECT to choose the Reset Hours function. ii. Use the arrow buttons to select Yes on the “Reset Maintenance Hours
17 Head-Feet Restrictions The HEAD-FEET parameter is a method of accounting for the voltage drop in the power/signal cable caused by the current draw
18 Equipment Compatibility This chart shows the compatibility and capacity of the various PS Power Supply models and their companion IT devices. Po
19 DMX512 control cable If the rig includes Wybron’s Infogate gateway, the DMX control cable from the lighting board to the Infogate, dimmers, and po
2 89020 – 1K (7.5 inch) Eclipse IT Shutter IT 811020 – 2K (12 inch) Eclipse Shutter IT 817010 – Large Format (5K/16 inch) Eclipse IT Shutter Manual r
20 Specifications Vane (blade) speed (under DMX control): Fast cut: 200 milliseconds (fully open to fully closed and vice-versa) Strobe rate: 1
21 Aperture diameter: 89020 — 8-inch model: diameter: 8 inches/203.2mm 810060 — 10-inch model: diameter: 10 inches/254mm 812020 — 16-inch mo
22 Infotrace Feedback System: Overview The diagram above outlines the key components of the Infotrace feedback system: Infotrace –
23 Wybron's IT equipment (Coloram IT, CXI IT, Eclipse Shutter IT, and Eclipse Iris IT) is equipped with a series of sensors that can relay a weal
24 Eclipse IT Shutter IPB Model 89020 – 1K (8 inch) Eclipse IT Shutter Callout Quantity Part Number Description (1) 4 SCRFH632150 Flat head screw (2
25 (16) 20 SCRFH440037 Flat head screw (17) 1 NC5FP 5 Pin chasis MT female (18) 1 031-1666 Fuse cap round (19) 1 313-007 Fuse 7 amp (20) 1 031-1693
26 Warranty Information WYBRON, INC. warrants to the original owner or retail customer that for a period of one year from date of delivery of a porta
27 Revision History Version Author Date Description 2.0 John Tabor 2/10/09 Model numbers/reformat
4 Safety Notice SAVE THESE INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS CAUTION: The Eclipse IT Shutter mechanical dowser has been designed to
5 Introduction Wybron’s Coloram IT system includes mechanical dowsers (Eclipse IT Shutter and Eclipse IT Iris) and PS Power Supplies utilizing the
6 Quick Start 1. Connect the Equipment A. Attach the Eclipse IT Shutter dowser to a powered light fixture. B. Connect the Eclipse IT Shutter dow
7 Using the Eclipse IT Shutter Dowser Operating Modes The Eclipse IT Shutter dowser has several modes of operation. In all cases, the PS Power Sup
8 Installing the Eclipse IT Shutter 1. Attach the Dowser to the Fixture Slide the dowser's mounting bracket into the gel frame holder of you
9 4. Connect the Dowser to the Power Supply Connect the dowser to the power supply using 4-pin cable. Refer to the HEAD-FEET RESTRICTIONS sectio
Comments to this Manuals